Used / Cargo Worthy
40 ft Used High Cube Shipping Container
Photos
Photos show representative condition. Used containers vary in color, markings, dents, surface rust, patches, and previous repairs. Every delivered unit must meet the condition standard stated on this page.
Product details
Enter your ZIP code to see containers available near you, with delivery priced to your address.
Have questions? Talk to a container expert at
Specifications
40 ft High Cube Shipping Container, drawn with its exterior dimensions: 40 ft long, 8 ft wide, 9 ft 6 in high.
Dimensions
| Length | Width | Height | |
|---|---|---|---|
| Exterior | 40 ft | 8 ft | 9 ft 6 in |
| Interior | 39 ft 6 in | 7 ft 8 in | 8 ft 10 in |
| Door opening | 7 ft 8 in | 8 ft 6 in |
Capacity and weight
Internal volume
About 2,690 cubic feet
Floor area
About 300 square feet
Empty weight
About 8,700 lb
Max gross weight
Up to 67,200 lb, per the unit's CSC plate
Build
Construction
Corten weathering steel, typically
Flooring
Marine-grade plywood, typically
Description
Our best overall storage value: maximum capacity with an extra foot of exterior height.
Cargo worthy, the highest used condition standard we sell, inspected before release: no daylight through the roof or walls, solid flooring, and cargo doors that open, close, and secure. It can look well used, with dents, rust, patches, and markings, because the standard is structural, not cosmetic.
Compare
Best for
Maximum dry-storage capacity Tall shelving, equipment, and stacked inventory Commercial, industrial, farm, and construction sites Long materials and palletized goods Buyers seeking the strongest value per cubic foot
Alternatives
Starting at
$975
Before delivery
Starting at
$2,775
Before delivery
Starting at
$3,600
Before delivery
Starting at
$1,300
Before delivery
Delivery requirements
Every container is placed using a tilt-bed trailer. The truck backs into position, raises the trailer, and carefully pulls forward while the container slides into place.
The driver cannot lift the container over fences, buildings, vehicles, trees, or other obstacles.
Site requirements
Route
Width
12 ft
Height
15 ft
A clear route from the road to the placement area Adequate width for turns, gates, and mirrors No low branches, wires, eaves, or other overhead hazards
Drop-off
Tilt height
18 ft
Clearance
100 to 120 ft
Clearance is the typical straight-line run. Depends on the tilt-bed trailer's length and the site.
Enough straight-line space for the truck and trailer
Unloading takes about 30 minutes once the truck is in position and the site is ready.
Ground
Firm, reasonably level ground No concealed soft ground, septic fields, or underground structures
| Drivable | Not drivable |
|---|---|
Next steps
After you order, you will be prompted to complete a short site review so we can confirm with the delivery driver. Read the delivery requirements before you order.
FAQ
How much taller is a high cube?
Nominal exterior height is 9 ft 6 in, approximately one foot taller than a standard container. Use the specification diagram for exact usable dimensions.
Is it the best value?
It often provides the best cost per cubic foot, but local inventory and delivery cost determine the real comparison.
Can it fit under power lines or trees?
The container and raised trailer require substantial overhead clearance. Upload site photos and disclose every overhead hazard.
Can I use it for export?
Not automatically. Cargo worthy is the condition standard built for shipping, but a current CSC plate and a carrier's acceptance for ocean shipment are not included. If you plan to export, tell us before you order and confirm what your carrier requires.
40 ft Used High Cube Shipping Container
Delivery in 7 to 10 business days
Add to Cart